diff options
Diffstat (limited to '.spacemacs')
| -rw-r--r-- | .spacemacs | 394 |
1 files changed, 394 insertions, 0 deletions
diff --git a/.spacemacs b/.spacemacs new file mode 100644 index 0000000..cb6ecc5 --- /dev/null +++ b/.spacemacs @@ -0,0 +1,394 @@ +;; -*- mode: emacs-lisp -*- +;; This file is loaded by Spacemacs at startup. +;; It must be stored in your home directory. + +(defun dotspacemacs/layers () + "Configuration Layers declaration. +You should not put any user code in this function besides modifying the variable +values." + (setq-default + ;; Base distribution to use. This is a layer contained in the directory + ;; `+distribution'. For now available distributions are `spacemacs-base' + ;; or `spacemacs'. (default 'spacemacs) + dotspacemacs-distribution 'spacemacs + ;; Lazy installation of layers (i.e. layers are installed only when a file + ;; with a supported type is opened). Possible values are `all', `unused' + ;; and `nil'. `unused' will lazy install only unused layers (i.e. layers + ;; not listed in variable `dotspacemacs-configuration-layers'), `all' will + ;; lazy install any layer that support lazy installation even the layers + ;; listed in `dotspacemacs-configuration-layers'. `nil' disable the lazy + ;; installation feature and you have to explicitly list a layer in the + ;; variable `dotspacemacs-configuration-layers' to install it. + ;; (default 'unused) + dotspacemacs-enable-lazy-installation 'unused + ;; If non-nil then Spacemacs will ask for confirmation before installing + ;; a layer lazily. (default t) + dotspacemacs-ask-for-lazy-installation t + ;; If non-nil layers with lazy install support are lazy installed. + ;; List of additional paths where to look for configuration layers. + ;; Paths must have a trailing slash (i.e. `~/.mycontribs/') + dotspacemacs-configuration-layer-path '() + ;; List of configuration layers to load. + dotspacemacs-configuration-layers + '( + html + javascript + auto-completion + ;; ---------------------------------------------------------------- + ;; Example of useful layers you may want to use right away. + ;; Uncomment some layer names and press <SPC f e R> (Vim style) or + ;; <M-m f e R> (Emacs style) to install them. + ;; ---------------------------------------------------------------- + helm + ;; auto-completion + ;; better-defaults + emacs-lisp + ;; git + ;; markdown + ;; org + ;; (shell :variables + ;; shell-default-height 30 + ;; shell-default-position 'bottom) + ;; spell-checking + ;; syntax-checking + ;; version-control + ) + ;; List of additional packages that will be installed without being + ;; wrapped in a layer. If you need some configuration for these + ;; packages, then consider creating a layer. You can also put the + ;; configuration in `dotspacemacs/user-config'. + dotspacemacs-additional-packages '() + ;; A list of packages that cannot be updated. + dotspacemacs-frozen-packages '() + ;; A list of packages that will not be installed and loaded. + dotspacemacs-excluded-packages '() + ;; Defines the behaviour of Spacemacs when installing packages. + ;; Possible values are `used-only', `used-but-keep-unused' and `all'. + ;; `used-only' installs only explicitly used packages and uninstall any + ;; unused packages as well as their unused dependencies. + ;; `used-but-keep-unused' installs only the used packages but won't uninstall + ;; them if they become unused. `all' installs *all* packages supported by + ;; Spacemacs and never uninstall them. (default is `used-only') + dotspacemacs-install-packages 'used-only)) + +(defun dotspacemacs/init () + "Initialization function. +This function is called at the very startup of Spacemacs initialization +before layers configuration. +You should not put any user code in there besides modifying the variable +values." + ;; This setq-default sexp is an exhaustive list of all the supported + ;; spacemacs settings. + (setq-default + ;; If non nil ELPA repositories are contacted via HTTPS whenever it's + ;; possible. Set it to nil if you have no way to use HTTPS in your + ;; environment, otherwise it is strongly recommended to let it set to t. + ;; This variable has no effect if Emacs is launched with the parameter + ;; `--insecure' which forces the value of this variable to nil. + ;; (default t) + dotspacemacs-elpa-https t + ;; Maximum allowed time in seconds to contact an ELPA repository. + dotspacemacs-elpa-timeout 5 + ;; If non nil then spacemacs will check for updates at startup + ;; when the current branch is not `develop'. Note that checking for + ;; new versions works via git commands, thus it calls GitHub services + ;; whenever you start Emacs. (default nil) + dotspacemacs-check-for-update nil + ;; If non-nil, a form that evaluates to a package directory. For example, to + ;; use different package directories for different Emacs versions, set this + ;; to `emacs-version'. + dotspacemacs-elpa-subdirectory nil + ;; One of `vim', `emacs' or `hybrid'. + ;; `hybrid' is like `vim' except that `insert state' is replaced by the + ;; `hybrid state' with `emacs' key bindings. The value can also be a list + ;; with `:variables' keyword (similar to layers). Check the editing styles + ;; section of the documentation for details on available variables. + ;; (default 'vim) + dotspacemacs-editing-style 'emacs + ;; If non nil output loading progress in `*Messages*' buffer. (default nil) + dotspacemacs-verbose-loading nil + ;; Specify the startup banner. Default value is `official', it displays + ;; the official spacemacs logo. An integer value is the index of text + ;; banner, `random' chooses a random text banner in `core/banners' + ;; directory. A string value must be a path to an image format supported + ;; by your Emacs build. + ;; If the value is nil then no banner is displayed. (default 'official) + dotspacemacs-startup-banner 'official + ;; List of items to show in startup buffer or an association list of + ;; the form `(list-type . list-size)`. If nil then it is disabled. + ;; Possible values for list-type are: + ;; `recents' `bookmarks' `projects' `agenda' `todos'." + ;; List sizes may be nil, in which case + ;; `spacemacs-buffer-startup-lists-length' takes effect. + dotspacemacs-startup-lists '((recents . 5) + (projects . 7)) + ;; True if the home buffer should respond to resize events. + dotspacemacs-startup-buffer-responsive t + ;; Default major mode of the scratch buffer (default `text-mode') + dotspacemacs-scratch-mode 'text-mode + ;; List of themes, the first of the list is loaded when spacemacs starts. + ;; Press <SPC> T n to cycle to the next theme in the list (works great + ;; with 2 themes variants, one dark and one light) + dotspacemacs-themes '(spacemacs-dark + spacemacs-light) + ;; If non nil the cursor color matches the state color in GUI Emacs. + dotspacemacs-colorize-cursor-according-to-state t + ;; Default font, or prioritized list of fonts. `powerline-scale' allows to + ;; quickly tweak the mode-line size to make separators look not too crappy. + dotspacemacs-default-font '("Source Code Pro" + :size 13 + :weight normal + :width normal + :powerline-scale 1.1) + ;; The leader key + dotspacemacs-leader-key "SPC" + ;; The key used for Emacs commands (M-x) (after pressing on the leader key). + ;; (default "SPC") + dotspacemacs-emacs-command-key "SPC" + ;; The key used for Vim Ex commands (default ":") + dotspacemacs-ex-command-key ":" + ;; The leader key accessible in `emacs state' and `insert state' + ;; (default "M-m") + dotspacemacs-emacs-leader-key "M-m" + ;; Major mode leader key is a shortcut key which is the equivalent of + ;; pressing `<leader> m`. Set it to `nil` to disable it. (default ",") + dotspacemacs-major-mode-leader-key "," + ;; Major mode leader key accessible in `emacs state' and `insert state'. + ;; (default "C-M-m") + dotspacemacs-major-mode-emacs-leader-key "C-M-m" + ;; These variables control whether separate commands are bound in the GUI to + ;; the key pairs C-i, TAB and C-m, RET. + ;; Setting it to a non-nil value, allows for separate commands under <C-i> + ;; and TAB or <C-m> and RET. + ;; In the terminal, these pairs are generally indistinguishable, so this only + ;; works in the GUI. (default nil) + dotspacemacs-distinguish-gui-tab nil + ;; If non nil `Y' is remapped to `y$' in Evil states. (default nil) + dotspacemacs-remap-Y-to-y$ nil + ;; If non-nil, the shift mappings `<' and `>' retain visual state if used + ;; there. (default t) + dotspacemacs-retain-visual-state-on-shift t + ;; If non-nil, J and K move lines up and down when in visual mode. + ;; (default nil) + dotspacemacs-visual-line-move-text nil + ;; If non nil, inverse the meaning of `g' in `:substitute' Evil ex-command. + ;; (default nil) + dotspacemacs-ex-substitute-global nil + ;; Name of the default layout (default "Default") + dotspacemacs-default-layout-name "Default" + ;; If non nil the default layout name is displayed in the mode-line. + ;; (default nil) + dotspacemacs-display-default-layout nil + ;; If non nil then the last auto saved layouts are resume automatically upon + ;; start. (default nil) + dotspacemacs-auto-resume-layouts nil + ;; Size (in MB) above which spacemacs will prompt to open the large file + ;; literally to avoid performance issues. Opening a file literally means that + ;; no major mode or minor modes are active. (default is 1) + dotspacemacs-large-file-size 1 + ;; Location where to auto-save files. Possible values are `original' to + ;; auto-save the file in-place, `cache' to auto-save the file to another + ;; file stored in the cache directory and `nil' to disable auto-saving. + ;; (default 'cache) + dotspacemacs-auto-save-file-location 'cache + ;; Maximum number of rollback slots to keep in the cache. (default 5) + dotspacemacs-max-rollback-slots 5 + ;; If non nil, `helm' will try to minimize the space it uses. (default nil) + dotspacemacs-helm-resize nil + ;; if non nil, the helm header is hidden when there is only one source. + ;; (default nil) + dotspacemacs-helm-no-header nil + ;; define the position to display `helm', options are `bottom', `top', + ;; `left', or `right'. (default 'bottom) + dotspacemacs-helm-position 'bottom + ;; Controls fuzzy matching in helm. If set to `always', force fuzzy matching + ;; in all non-asynchronous sources. If set to `source', preserve individual + ;; source settings. Else, disable fuzzy matching in all sources. + ;; (default 'always) + dotspacemacs-helm-use-fuzzy 'always + ;; If non nil the paste micro-state is enabled. When enabled pressing `p` + ;; several times cycle between the kill ring content. (default nil) + dotspacemacs-enable-paste-transient-state nil + ;; Which-key delay in seconds. The which-key buffer is the popup listing + ;; the commands bound to the current keystroke sequence. (default 0.4) + dotspacemacs-which-key-delay 0.4 + ;; Which-key frame position. Possible values are `right', `bottom' and + ;; `right-then-bottom'. right-then-bottom tries to display the frame to the + ;; right; if there is insufficient space it displays it at the bottom. + ;; (default 'bottom) + dotspacemacs-which-key-position 'bottom + ;; If non nil a progress bar is displayed when spacemacs is loading. This + ;; may increase the boot time on some systems and emacs builds, set it to + ;; nil to boost the loading time. (default t) + dotspacemacs-loading-progress-bar t + ;; If non nil the frame is fullscreen when Emacs starts up. (default nil) + ;; (Emacs 24.4+ only) + dotspacemacs-fullscreen-at-startup nil + ;; If non nil `spacemacs/toggle-fullscreen' will not use native fullscreen. + ;; Use to disable fullscreen animations in OSX. (default nil) + dotspacemacs-fullscreen-use-non-native nil + ;; If non nil the frame is maximized when Emacs starts up. + ;; Takes effect only if `dotspacemacs-fullscreen-at-startup' is nil. + ;; (default nil) (Emacs 24.4+ only) + dotspacemacs-maximized-at-startup nil + ;; A value from the range (0..100), in increasing opacity, which describes + ;; the transparency level of a frame when it's active or selected. + ;; Transparency can be toggled through `toggle-transparency'. (default 90) + dotspacemacs-active-transparency 90 + ;; A value from the range (0..100), in increasing opacity, which describes + ;; the transparency level of a frame when it's inactive or deselected. + ;; Transparency can be toggled through `toggle-transparency'. (default 90) + dotspacemacs-inactive-transparency 90 + ;; If non nil show the titles of transient states. (default t) + dotspacemacs-show-transient-state-title t + ;; If non nil show the color guide hint for transient state keys. (default t) + dotspacemacs-show-transient-state-color-guide t + ;; If non nil unicode symbols are displayed in the mode line. (default t) + dotspacemacs-mode-line-unicode-symbols t + ;; If non nil smooth scrolling (native-scrolling) is enabled. Smooth + ;; scrolling overrides the default behavior of Emacs which recenters point + ;; when it reaches the top or bottom of the screen. (default t) + dotspacemacs-smooth-scrolling t + ;; If non nil line numbers are turned on in all `prog-mode' and `text-mode' + ;; derivatives. If set to `relative', also turns on relative line numbers. + ;; (default nil) + dotspacemacs-line-numbers nil + ;; Code folding method. Possible values are `evil' and `origami'. + ;; (default 'evil) + dotspacemacs-folding-method 'evil + ;; If non-nil smartparens-strict-mode will be enabled in programming modes. + ;; (default nil) + dotspacemacs-smartparens-strict-mode nil + ;; If non-nil pressing the closing parenthesis `)' key in insert mode passes + ;; over any automatically added closing parenthesis, bracket, quote, etc… + ;; This can be temporary disabled by pressing `C-q' before `)'. (default nil) + dotspacemacs-smart-closing-parenthesis nil + ;; Select a scope to highlight delimiters. Possible values are `any', + ;; `current', `all' or `nil'. Default is `all' (highlight any scope and + ;; emphasis the current one). (default 'all) + dotspacemacs-highlight-delimiters 'all + ;; If non nil, advise quit functions to keep server open when quitting. + ;; (default nil) + dotspacemacs-persistent-server nil + ;; List of search tool executable names. Spacemacs uses the first installed + ;; tool of the list. Supported tools are `ag', `pt', `ack' and `grep'. + ;; (default '("ag" "pt" "ack" "grep")) + dotspacemacs-search-tools '("ag" "pt" "ack" "grep") + ;; The default package repository used if no explicit repository has been + ;; specified with an installed package. + ;; Not used for now. (default nil) + dotspacemacs-default-package-repository nil + ;; Delete whitespace while saving buffer. Possible values are `all' + ;; to aggressively delete empty line and long sequences of whitespace, + ;; `trailing' to delete only the whitespace at end of lines, `changed'to + ;; delete only whitespace for changed lines or `nil' to disable cleanup. + ;; (default nil) + dotspacemacs-whitespace-cleanup nil + )) + + + +(defun dotspacemacs/user-init () + "Initialization function for user code. +It is called immediately after `dotspacemacs/init', before layer configuration +executes. + This function is mostly useful for variables that need to be set +before packages are loaded. If you are unsure, you should try in setting them in +`dotspacemacs/user-config' first." + + + ) + + +(defun dotspacemacs/user-config () + "Configuration function for user code. +This function is called at the very end of Spacemacs initialization after +layers configuration. +This is the place where most of your configurations should be done. Unless it is +explicitly specified that a variable should be set before a package is loaded, +you should place your code here." + + (defun gcm-scroll-up () + (interactive) + (scroll-down 1)) + (defun gcm-scroll-down () + (interactive) + (scroll-up 1)) + + ;(global-set-key (kbd "<mouse-4>") 'gcm-scroll-up) + ;(global-set-key (kbd "<mouse-5>") 'gcm-scroll-down) + + + (defun my-setup-indent (n) + (interactive) + (setq-default indent-tabs-mode nil) + ;; java/c/c++ + (setq-local c-basic-offset n) + ;; web development + (setq-local coffee-tab-width n) ; coffeescript + (setq-local javascript-indent-level n) ; javascript-mode + (setq-local js-indent-level n) ; js-mode + (setq-local js2-basic-offset n) ; js2-mode, in latest js2-mode, it's alias of js-indent-level + (setq-local web-mode-markup-indent-offset n) ; web-mode, html tag in html file + (setq-local web-mode-css-indent-offset n) ; web-mode, css in html file + (setq-local web-mode-code-indent-offset n) ; web-mode, js code in html file + (setq-local css-indent-offset n) ; css-mode + ) + + + (defun my-switch-buffer () + "Switch buffers, but don't record the change until the last one." + (interactive) + (let ((blist (copy-sequence (buffer-list))) + current + (key-for-this (this-command-keys)) + (key-for-this-string (format-kbd-macro (this-command-keys))) + done) + (while (not done) + (setq current (car blist)) + (setq blist (append (cdr blist) (list current))) + (when (and (not (get-buffer-window current)) + (not (minibufferp current))) + (switch-to-buffer current t) + (message "Type %s to continue cycling" key-for-this-string) + (when (setq done (not (equal key-for-this (make-vector 1 (read-event))))) + (switch-to-buffer current) + (clear-this-command-keys t) + (setq unread-command-events (list last-input-event))))))) + + (global-set-key (kbd "M-q") 'my-switch-buffer) + (global-linum-mode) + (my-setup-indent 2) + + ) + +;; Do not write anything past this comment. This is where Emacs will +;; auto-generate custom variable definitions. +(custom-set-variables + ;; custom-set-variables was added by Custom. + ;; If you edit it by hand, you could mess it up, so be careful. + ;; Your init file should contain only one such instance. + ;; If there is more than one, they won't work right. + '(ansi-color-faces-vector + [default default default italic underline success warning error]) + '(ansi-color-names-vector + ["#242424" "#e5786d" "#95e454" "#cae682" "#8ac6f2" "#333366" "#ccaa8f" "#f6f3e8"]) + '(clean-aindent-mode t) + '(custom-enabled-themes (quote (wombat))) + '(custom-safe-themes + (quote + ("bffa9739ce0752a37d9b1eee78fc00ba159748f50dc328af4be661484848e476" default))) + '(evil-indent-convert-tabs nil) + '(evil-want-Y-yank-to-eol nil) + '(indent-tabs-mode nil) + '(js-indent-level 1) + '(js2-basic-offset 2) + '(tab-always-indent (quote complete)) + '(tab-stop-list nil) + '(tab-width 1)) +(custom-set-faces + ;; custom-set-faces was added by Custom. + ;; If you edit it by hand, you could mess it up, so be careful. + ;; Your init file should contain only one such instance. + ;; If there is more than one, they won't work right. + ) |